+918097391254 sales@hateng-laser.com
  • Facebook
  • X
  • Instagram
  • Facebook
  • X
  • Instagram
hateng-laser.com
  • Home
  • Table Top Dot Pin Machine
  • Laser Marking Machine
  • Blogs
  • Contact Us
Select Page
QR Codes That Won’t Scan: Getting Laser-Marked Codes Right on Metal Parts

QR Codes That Won’t Scan: Getting Laser-Marked Codes Right on Metal Parts

by zambare.amol23@gmail.com | Oct 23, 2026 | table top marking machine

By Hateng Laser | 10 min read Most laser-marked QR codes that fail on metal come down to five things: low contrast, a code that’s too small for the scanner, a missing quiet zone, a mark that’s out of focus, and glare from a shiny surface. Fix those and...
Is A ₹85,000 Dot Pin Machine Worth It Over A ₹1.6 Lakh Laser Machine For Basic Serial Number Marking?

Is A ₹85,000 Dot Pin Machine Worth It Over A ₹1.6 Lakh Laser Machine For Basic Serial Number Marking?

by zambare.amol23@gmail.com | Jul 10, 2026 | laser marking, table top marking machine

Summary: For basic, low-volume serial number marking, a ₹85,000 dot pin machine is usually worth it and often the smarter buy, because it marks deep, permanent serials on metal at a much lower upfront cost. A ₹1.6 lakh laser marking system only pays off when you need...
What Is A Table Top Dot Pin Marking Machine, And How Is It Different From A Handheld One?

What Is A Table Top Dot Pin Marking Machine, And How Is It Different From A Handheld One?

by zambare.amol23@gmail.com | Jun 20, 2026 | table top marking machine

Summary It is a bench-mounted dot peen system for permanent marking. It suits stable parts, repeat work, and higher accuracy. A handheld model is better for large, fixed, or awkward parts. Laser marking gives contact-free results, but needs a different setup. Hateng...
Are There Any Hidden Costs After Buying A Table Top Marking Machine — Software, Pins, Cables?

Are There Any Hidden Costs After Buying A Table Top Marking Machine — Software, Pins, Cables?

by zambare.amol23@gmail.com | Jun 11, 2026 | table top marking machine

Summary Yes, hidden costs can appear after purchase. Software licences may be separate. Fixtures, cables, and spare parts can add up. Dot peen systems may need pins. Laser systems may need lenses, filters, and extraction support. Service, training, and downtime also...
  • Facebook
  • X
  • Instagram
2025 © All rights reserved by hateng-laser.com